Thiol-functionalized carbon dot-enabled self-catalytic reduction-dynamic assembly for constructing three-dimensional porous reduced graphene oxide aerogels toward high-performance terahertz modulation

🔗 원문 전체 보기 → Royal Society of Chemistry

요약

J. Mater. Chem. C, 2026, Advance ArticleDOI: 10.1039/D6TC00568C, PaperChi Xiao, Mingyang Yang, Yi Li, Bin Li, Zhixun Zhang, Lipei Fu, Ming Zhou, Qijun Li, Jing TanSH–CDs are conducive to the formation of rGO aerogels with a three-dimensional porous network st…

본문

Thiol-functionalized carbon dot-enabled self-catalytic reduction-dynamic assembly for constructing three-dimensional porous reduced graphene oxide aerogels toward high-performance terahertz modulation

* Corresponding authors

a School of Mechanical Engineering, Jiangsu University, Zhenjiang, China

b State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing, China
E-mail: [email protected]

c Institute of Technology for Carbon Neutralization, College of Physical Science and Technology, Yangzhou University, Yangzhou, China
E-mail: [email protected]

d Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Beijing, China

e School of Petroleum and Natural Gas Engineering, Changzhou University, Changzhou, Jiangsu Province, China

f School of Mechanical Engineering, Yangzhou University, Yangzhou, China
E-mail: [email protected]

g State Key Laboratory of Organic Electronics and Information Displays & Institute of Advanced Materials (IAM), Nanjing University of Posts & Telecommunications, 9 Wenyuan Road, Nanjing, China

Abstract

Three-dimensional (3D) porous reduced graphene oxide (rGO) aerogels are promising for broadband terahertz (THz) modulation due to their low density, high porosity, and tunable conductivity. However, conventional methods for reducing graphene oxide often cause graphene layer agglomeration and stacking, limiting its THz applications. Here, a novel method for fabricating lightweight porous rGO aerogels is proposed based on a thiol-functionalized carbon dot (SH–CD)-enabled “self-catalytic reduction-dynamic assembly” strategy. As a dual-functional agent, SH–CDs enable efficient in situ reduction and controlled crosslinking of GO sheets under mild reaction conditions, thereby facilitating the construction of aerogels featuring high electrical conductivity, a fully developed 3D interconnected porous network, and abundant interfacial domains. This well-designed structure effectively suppresses excessive densification of the graphene layer while enhancing the internal reflection and scattering of THz waves at multiple interfacial domains. Consequently, the rGO aerogels exhibit outstanding THz shielding and absorption, achieving a maximum reflection loss of −37 dB and a shielding effectiveness of −44 dB, with average values of −26 and −37 dB, respectively—exceeding those of most reported materials. THz transmission and reflection imaging further confirm the material's potential for electromagnetic stealth, shielding, and related applications.