← 목록으로
AI

NVIDIA GeForce RTX 30 GPUs Get Up To 2X Faster AI Compute Performance With New GPU Unlock Mod, Real-World Gains Of Up To 60%

· 읽기 19분

🔗 원문 전체 보기 → Wccftech

NVIDIA GeForce RTX 30 GPUs Get Up To 2X Faster AI Compute Performance With New GPU Unlock Mod, Real-World Gains Of Up To 60%

요약

NVIDIA's aging GeForce RTX 30 Series (codename Ampere) GPUs apparently have a considerable amount of untapped computing potential. A new open-source project called GPU Unlock, developed by GitHub user Zagitta, allows Ampere GPUs to overcome certain artificial…

본문

AI NVIDIA GeForce RTX 30 GPUs Get Up To 2X Faster AI Compute Performance With New GPU Unlock Mod, Real-World Gains Of Up To 60% Sebastian Castellanos • Oct 24, 2026 at 10:52am EDT Comments Add to Preferres Sources
NVIDIA GeForce RTX 3090 graphics card displayed with text reading 'Unlock Up To 2X AI Throughput In RTX 30 GPUs.'

NVIDIA's aging GeForce RTX 30 Series (codename Ampere) GPUs apparently have a considerable amount of untapped computing potential. A new open-source project called GPU Unlock, developed by GitHub user Zagitta, allows Ampere GPUs to overcome certain artificial performance restrictions, nearly doubling their Tensor Core compute throughput in specific workloads without requiring a modified NVIDIA driver or a permanent VBIOS flash.

A presentation slide titled 'GPU unlock 1.0.0' discusses unlocking FP/BF16 instruction rates on Nvidia 3000's cards with a Linux kernel module that combines CMP unlocker's V67/PLM technique and mentions specific settings such as 'SS0 0x88888888' and 'SS1 0x8 IMLA4' for cards like GA102 and GA104.

The project specifically targets the instruction issue-rate limitation affecting FP16/BF16 Tensor Core operations with FP32 accumulation, which operates at a reduced rate on consumer Ampere graphics cards compared to their professional counterparts. By removing this restriction, the tool effectively enables additional computing performance that the GPUs were already capable of delivering.

Related Story NVIDIA RTX 30 & RTX 40 GPUs Get Impressively Fast In AI LLMs As Compute Doubles With New Unlock Tool But Prices Surge Too

Interestingly, GPU Unlock builds upon earlier research involving NVIDIA's CMP cryptocurrency mining GPUs. It combines the firmware unlocking techniques of the CMP project with an early initialization approach, using a Linux kernel module that executes before NVIDIA's GPU driver loads. The module modifies the relevant hardware speed selectors, performs a Function Level Reset (FLR), and then allows the unmodified driver to initialize the GPU normally.

A close-up of an NVIDIA GA100 GPU with visible components labeled 'LR22' on the circuit board.
An NVIDIA CMP 170HX cryptocurrency mining GPU PCB. Image source: Wccftech

This also means that users won't have to patch their NVIDIA drivers every time a new version is released. The developer currently lists support for GA102, GA103, GA104, and GA106 GPUs, covering a substantial portion of the GeForce RTX 30 Series lineup, although compatibility and performance improvements aren't guaranteed across every graphics card.

The performance improvements can be remarkable. According to benchmarks published in the project's GitHub repository, an RTX 3090 Ti operating at a 450W power limit delivered the following results in dense matrix multiplication (GEMM) tests with FP32 accumulation:

PrecisionStockGPU UnlockImprovement
FP1687.46 TFLOPS118.39 TFLOPS+35%
BF1687.50 TFLOPS157.41 TFLOPS+80%
TF3242.58 TFLOPS82.61 TFLOPS+94%

These results aren't exclusive to the RTX 3090 Ti, either. An RTX 3080 Ti owner reported BF16 throughput increasing from 71.59 to 113.98 TFLOPS, while TF32 performance improved from 35.65 to 65.28 TFLOPS, with the GPU limited to 315W. Another RTX 3080 10GB compatibility report documented FP16/BF16 performance increasing from approximately 65 TFLOPS to 110–113 TFLOPS under the card's original 320W power limit. These improvements were also highlighted on X.

But what about actual application performance? Fortunately, community members have already started testing the unlock in real-world AI workloads, and the preliminary findings are encouraging.

One RTX 3090 Ti user on Reddit benchmarked GPU Unlock in ComfyUI, reporting 58.6% higher throughput with MOSS-Image SFT BF16, 57.2% with Qwen-Image 2.1 Turbo BF16, and 56.1% with Z-Image Turbo BF16. Meanwhile, INT8 configurations saw much smaller improvements, with MOSS-Image SFT INT8 improving by just 0.3%. The tester also reported identical decoded image output between the stock and unlocked configurations.

I tested the RTX 30-series GPU Unlock: up to 59% higher throughput in ComfyUI (3090 Ti)
byu/under-_-null inStableDiffusion

Large Language Model (LLM) inference is another potential beneficiary, although improvements are considerably more workload-dependent. For example, an RTX 3090 compatibility report documented a 33% improvement in vLLM prompt-processing/inference throughput, while token generation remained practically unchanged. That's understandable, considering that LLM decoding is frequently limited by memory bandwidth rather than raw Tensor Core compute throughput.

An additional development worth highlighting is an experimental Windows implementation, which uses a UEFI-based approach instead of the original Linux kernel module. Its developer has documented a successful RTX 3090 implementation, with BF16 compute throughput increasing by approximately 82.5%. However, this remains an experimental, hardware-specific solution rather than a generally compatible Windows release.

There are also important limitations. GPU Unlock doesn't increase memory bandwidth, enable additional CUDA cores, or automatically improve every workload. At least one RTX 3080 Ti 20GB compatibility report documented a successful unlock procedure without the expected BF16 performance improvement, demonstrating that results aren't universal.

As for gaming, NVIDIA's DLSS technologies also utilize Tensor Cores, but there's currently no convincing evidence that GPU Unlock improves gaming performance or DLSS execution times. The affected instructions and accumulation modes need to be used by the actual workload for any benefit to materialize. Consequently, the impressive compute benchmarks shouldn't be mistaken for an equivalent increase in gaming FPS.

Nevertheless, GPU Unlock is an intriguing development for GeForce RTX 30 Series owners, particularly those using their GPUs for local AI inference, image generation, and other compute-intensive applications. While the project is still experimental, the prospect of extracting substantially more performance from existing hardware without permanently modifying it is certainly appealing.

News Source: GPU Unlock GitHub repo

Sebastian Castellanos Photo

About the author: Sebastian Castellanos is a data scientist by education and training. He's also deeply passionate about PC gaming hardware and software. He has recently started writing technical articles and guides on Wccftech about PC hardware, games and mods.

Follow Wccftech on Google to get more of our news coverage in your feeds.

Further Reading

An NVIDIA GeForce RTX 3090 Ti graphics card is displayed on a dark surface, featuring the model name prominently on the casing.

NVIDIA GeForce RTX 3090 Ti Gets Nearly 80% FP16/BF16 Compute Boost With Linux-Based Unlocking Trick

The Uncharted: The Nathan Drake Collection launcher screen displays options for 'Drake's Fortune,' 'Among Thieves,' and 'Drake's Deception,' with '2 Among Thieves' selected, and lists graphic quality settings including 'LOW: 30 FPS - steady' and 'ULTRA: Above 60 FPS'; a message below reads 'The game stopped unexpectedly.'

The First Three Uncharted Games Are Now Playable On PC With 120 FPS, DLSS, FSR, And Frame Generation Through Unofficial Ports

An NVIDIA GeForce RTX 3090 graphics card with a 'Power Limit' indicator showing an increase from 600 W to 800 W.

RTX 5090 Power Limit Jumps From 600W To 800W With A Custom VBIOS Editor, While The RTX 4090 Gets Pushed To 700W

An NVIDIA RTX 3080 GPU is displayed with the text 'NVIDIA Smooth Motion now on RTX 30 Series GPUs' and the phrases 'Higher FPS. Smoother Games. More Play.'

NVIDIA Smooth Motion Now Runs on RTX 30 Series GPUs Thanks to NVSmooth30 Mod, RTX 3050 Laptop and RTX 3080 Confirmed Working

Read all comments on NVIDIA GeForce RTX 30 GPUs Get Up To 2X Faster AI Compute Performance With New GPU Unlock Mod, Real-World Gains Of Up To 60%

Trending Stories

Popular Discussions

출처: Wccftech

작성자: Sebastian Castellanos

원문 게시일: 2026-10-24T14:52:16Z

이 글은 NewsAPI를 통해 자동으로 수집된 콘텐츠입니다. 원문은 위 링크를 통해 확인하세요.

AI ArtificialIntelligence OpenAI LLM Wccftech
← 목록으로